Dipper-PTEC
High-performance:
32 bit microprocessor with 16 MB of memory for 1,120,000 readings
Low maintenance:
Low operating costs, 1.5 V size C replaceable batteries, without the need to use tools (option: 3.6 V lithium batteries to maximise the service life)
Slim:
Installation using 1" tube diameter (probe)
Smart:
For each measurement task - a suitable measurement routine: single value measurement, average value measurement, event control (swell mode, delta mode), flow calculation (W/Q table, polynomial), calculation and storage of salinity, TDS value and water density.
Accurate and reliable:
- Conductivity measurement electrode with automatic measuring range switching, for maximum resolution (0-0.2 mS/cm; 0.2-2 mS/cm; 2-20 mS/cm; 20-200 mS/cm)
- Water level: 0.05 % Measurement accuracy (= 1 cm at 20 m measuring range)
Robust:
1.4539 stainless steel housing can also be used under extreme environmental conditions (landfill sites, contaminated sites, brackish water etc.)
Flood-proof:
2-step, permanent flood protection up to 3 m (standard), also available in IP68 (Type Dipper-APT)
User-friendly:
Two clever apps are available for configuration and data read-out of the Dipper-PTEC. Operating software for beginners SEBAConfig (Windows) a comfortable user interface (Wizard) for various routine tasks. with SEBAConfigApp (Android, iOS) and the SEBA BlueCon to communicate comfortably wirelessly via Bluetooth with a smartphone or tablet with the logger.
Modular:
When combined with our data transmission module SlimCom, the Dipper-PT 's recorded measurements are transferred remotely to your workstation.
Water Level
| Sensor | Relative pressure sensor |
|---|---|
| Measurement Principle | Capacitive with ceramic measuring cell |
| Measuring Range |
0-2/5/10/20/30/40/50/70/100/200/300 m water column or according to specifications |
| Measuring Accuracy | ± 0.05% FS |
| Long Term Stability | ±0.1 %/year |
Water Temperature
| Sensor | NTC with polynomial linearisation |
|---|---|
| Measurement Principle | NTC resistor |
| Measuring Range |
-5 °C - +50 °C |
| Measuring Accuracy | 0.1 °C |
| Pressure Range | 0-30 bar |
Conductivity
| Sensor | 4-electrode measuring cell |
|---|---|
| Measuring Range |
0-200 mS/cm (total) |
| Measuring Accuracy | ± 1 µS/cm for measuring range of 0-200 µS/cm ±0,5 % for measuring range of 0,2-200 mS |
| Pressure Range | 0-30 bar |
Logger
| Controller | 32 Bit Flash controller with integrated WatchDog RTC-IC Real Time Clock |
|---|---|
| Memory Capacity |
16 MB (= 1,120,000 readings) |
| Save Interval | 30 s - 99 hours, standard, from 2 s in the quick-log mode, optionally |
| Channels | Max. 32 (water level, temperature, conductivity, density, TDS, salinity) |
| Measurement Routines | Single value, average value, event clock, Delta mode, pumping test control |
| Communication Interface | RS485, SDI-12 (option) |
| Operation | Interface Converter (RS 485/USB), BlueCon (Bluetooth) |
Housing
| Material | 1.4539 stainless steel |
|---|---|
| Dimensions | Ø 22 mm, length: 320 mm |
| Protection Class |
Probe: IP68 RS485 interface: IP67 (immersion depth with a desiccant cartridge up to 3 m, depending on the cable length) |
Power Pack Module (Pluggable)
| Material (Housing) | Aluminium |
|---|---|
| Dimensions | Ø 35 mm, length: 345 mm |
| Protection Class | IP68 |
| Power Supply |
4 x 1.5 V alkaline manganese batteries, standard 4 x 3.6 V lithium C batteries, optional |
| Suspension Unit |
Diameter-independant for SEBA caps starting from a 2" pipe diameter, standard Diameter-dependent insert panels for SEBA caps starting from a 2" pipe diameter, optional |
| Measuring Device Protection | Protective caps for the RS485 interface (dust and moisture protection) |
| Cable |
Reinforced measuring cable with a pressure compensation line Gore-tex membrane, desiccant cartridge with SilicaGel for protection of the pressure compensation line |
Others
| Operating Temperature | -5 °C - +60 °C (non-freezing) |
|---|---|
| Hanging Depth | Up to 700m |
