MJK Float Switch 7030

The MJK Level Switch 7030 is produced without old fashion mercury contacts and is instead delivered with an electromechanical switch system. Thus, in order to protect the environment as best as possible, the level switch has a built-in fully secured micro switch. When the level switch changes position in the liquid, the hermetic micro switch is activated by a moving weight. Electrodes give an alarm or a pump signal when the level changes. Level switches are therefore typically used to alert on too high levels.

The MJK 7030 level switches are often installed in wastewater pumping stations and treatment plants. The level switches operates with a counterweight and a mercury-free micro switch in the secured "ball".

The activation level of the level switch depends on the cable length. It will allow the switch either a higher or lower level before the ball is tilted and the micro switch is activated.

In case of large amounts of sludge on top of the water in the well, 7030 can be used in submerged state. That way, you are always sure of getting reliable level control.

Contact System Mechanical
Output Change-over contact
Max. load AC: 250V / 16A, DC: 220V / 0,5A 24V / 16A
Housing Polypropylene