The KLL-Q-2 can be adapted and tailored to the desired measuring task. The choices are cable drums of varying sizes with cable lengths of 30 to 400 meters and three multiparameter sensors (MPS-D3/D8/K16), which can be equipped with a variety of water quality sensors.
The KLL-Q-2 is suitable for the sampling of lakes and reservoirs as well as for monitoring of groundwater measuring points starting from 2" pipe diameter.
The printed round cable allows an exact lowering of multiparameter probe to the desired measuring depth. Thus, profile measurements can be carried out in a very short time. Optionally, an integrated logger is available which automatically stores all relevant measurement data manually by pressing a key as at predetermined intervals.
Compact and user-friendly:
The KLL-Q-2 with its robust aluminum support frame can be easily transported from one measuring point to another. For operation and display, the user is equipped with a membrane keypad and LCD. Calibration or adjustment of the sensors using the SEBA operating software is done over the integrated RS232 interface with a connected multiparameter sensor ConfigPC.
|Cable Drum||Shock-resistant plastic|
|Dimension||Depending on cable length|
|Keyboard||3 multifunction buttons|
|Display||3-line backlit LCD|
|Length||30m/ 50m / 80m/ 100m/ 150m/ 200m/ 300m/ 400m|
|Material||PE jacket, printed with cm/ dm/ m scaling, food safe|
|Accuracy||<1cm at 100m cable length|
|Logger Controller||16Bit Flash controller with integrated WatchDog RTC-IC Real Time Clock|
|Memory Capacity||16 MB (= 1.250.000 Messwerte)|
|Save Interval||Manually or cycle-controlled by 2min - 99 hours|
|Measurement Routines||Single value, average value, event clock, Delta mode|
|Operation||Interface cable (USB/RS232)|