UVB Sensor
Skye offer sensors to measure light levels in the Ultraviolet A and Ultraviolet B wavebands. The wavelengths used in these sensors are according to CIE standards.
- The dimensions and overall look of these sensors are similar to that of our other sensors. The housing is black aluminium and sealed to IP67 standards.
- The light sensor head is cosine corrected and has been designed with an integral amplifier to give a voltage output for use with most dataloggers, computers, PLCs, etc.
- Sensors calibration is traceable to NPL and each sensor is issued with a calibration certificate.
Construction | Anodised black aluminium, sealed to IP67 |
---|---|
Cable | Screened. 7-1-4-C military specification. Cable gland on sensor housing |
Sensor | Cosine corrected head. Specially formulated diffuser. |
Detector | SiC Photodetector |
Spectral Response | 280nm - 315nm |
Working Range (1) | 0-10 W m2 |
Output Signal | 0-2V |
Sensitivity |
150 mV / W m2 |
Thermal Drift of Output | 0.075mV/°C max (-20 to +50°C) |
Thermal Drift of Zero Offset | Typically 0.03 mV/°C (-20 to +50°C) |
Absolute calibration error (2) | typ. <3%, 5% max |
Output Impedance | 500Ω |
Power Supply | 5-15VDC |
Cosine error (3) | 3% |
Azimuth error (4) | < 1% |
Longterm stability (5) | ±2% |
Temperature coefficient | ±2% |
Response time (6) | better than 10ms |
Temperature range | -20 to +70°C |
Humidity range | 0-100% RH |