Data Logger UnilogCom
Efficient:
The UnilogCom is especially characterised by its low energy consumption as well as by its intelligent power management. Depending on the infrastructure, the power supply can be provided over an external battery compartment (6 x 1.5 V alkaline manganese Mono D batteries), 12 V battery, solar panel or an external 230 V/12 VDC power supply unit.
Variable:
Depending on the measurement task, up to 32 logical channels can be managed by the logger. So, for example, it is possible to connect 16 digital DS(T) 22 SEBA-pressure/temperature sensors, or three MPS-D8 multiparameter sensors via the internal RS485 interface. Using an external A/D converter, one can connect up to eight analog sensors.
Smart:
Upon reaching the predefined event thresholds, e.g. in the case of a flood, the UnilogCom automatically shortens both the measurement and the transmission interval, and an alarm SMS can be sent to up to eight participants.
User-friendly:
Two APPs are available for configuration and data read-out of UnilogCom: operating software SBEAConfig (Windows) for beginners has an intuitive user interface (Wizard) for various routine tasks. SEBAConfigApp (Android, iOS) and BlueCon 2 (our Bluetooth module) are combined to facilitate configuration and data readout wirelessly with a smartphone or tablet, directly from a data logger.
Last but not least:
With the password-protected web portal SEBA Hydrocenter data is not only safe, but also accessible at any time on the road or in the office. Alternatively, there is also the possibility of simple data provision on a secure SEBA FTP server.
Logger
Controller |
32Bit Flash controller with integrated WatchDog RTC-IC Real-Time Clock |
---|---|
Memory Capacity | 16 MB (= 1.120.000 readings) |
Save Interval | 2min - 99 hours |
Channels | Max. 32 |
Measurement Routines | Single value, Average value, Event clock, Delta mode |
Communication Interface | RS232 (standard), Bluetooth (optional) |
Operation |
Interface cable (USB/RS232) BlueCon (Bluetooth) |
Inputs |
RS485 sensor interface (SHWP) SDI-12 sensor interface 2 analog inputs (bi/unipolar) for current/voltage (e.g. 0-1 V, 4-20 mA, etc.) optionally extendable to max. 32 analog inputs by external modules 1 encoder input (not possible in combination with contact inputs) 2 contact inputs for monitoring/logging (not possible in combination with encoder input) 1 impulse input (rain) |
Housing
Material | Polycarbonate |
---|---|
Dimensions | 157x126x60 mm (LxWxH) |
Display | 3-line LCD |
Keyboard | 3 multifunction buttons |
Protection Class | IP65 |
Fastening | Mounting plate, top-hat rail |
Modem 4G
Supported Networks | GPRS/EDGE/UMTS/HSDPA/HSDPA+/LTE |
---|---|
Frequencies | 800/900/1800/2100/2600 MHz (Worldwide) |
Current Consumption |
Idle: < 50µA Active: typically 140mA (at 12V), current peaks up to max. 400 mA (at 12V) |
FTP Push | ZRXP, D-Channel, CSV or ACRON format |
SMS Data Push |
Binary format |
Others
Power Supply |
12V DC |
---|---|
Operating Temperature | -40°C - +70°C |